Carbide Bits


All Purpose

Blunt point but heavier carbide bit for longer life. For all types of asphalt and abrasive material. Wide tip for high fracture resistance. PN: 6650137EF

For use on these attachments: Planers and wheelsaws
 

All Purpose

Blunt point but heavier carbide bit for longer life. For all types of asphalt and abrasive material. Wide tip for high fracture resistance. PN: 6650137EF

For use on these attachments: Planers and wheelsaws

Concrete Bit

For cutting concrete and rock. Bit does not have protective flange since concrete debris does not bind the bit as easily as asphalt. The carbide tip is set deeper into the body of this bit to hold it more securely.Offers good wear characteristics due to its blunt point. PN: 6650138EF

For use on these attachments: planers and wheel saws

Concrete Bit

For cutting concrete and rock. Bit does not have protective flange since concrete debris does not bind the bit as easily as asphalt. The carbide tip is set deeper into the body of this bit to hold it more securely.Offers good wear characteristics due to its blunt point. PN: 6650138EF

For use on these attachments: planers and wheel saws

Heavy Duty Concrete

Best bit for hard concrete with large aggregate or steel rebar. For drilling concrete and rock cutting. Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Heavy Duty

Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Heavy Duty Concrete

Best bit for hard concrete with large aggregate or steel rebar. For drilling concrete and rock cutting. Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Standard

Standard from the factory on 14 to 24-in planers.  For use in all types of
asphalt. Full sleeve retainer for entire block bore protection. Bits have a flange at the
base to protect the bit holder. Sharper point for greater performance. PN: 6672259EF

For lower HP cold planers and wheels saws.

Standard

Standard from the factory on 14 to 24-in planers.  For use in all types of
asphalt. Full sleeve retainer for entire block bore protection. Bits have a flange at the
base to protect the bit holder. Sharper point for greater performance. PN: 6672259EF

For lower HP cold planers and wheels saws.

Surface Planer Bit

Standard planer bit from the factory for surface planers. Smaller in size than normal planer bits. For drilling in medium to hard conditions. Will not survive impact with steel. Flanged carbide tip for increased wear resistance in abrasive cutting.

PN: 6906904EF

High Impact

For high impact and abrasive applications. Deep recessed carbide for longer life. Washer to provide block protection and full sleeve retainer to protect the entire block bore. PN: 7010631EF

For use on the wheel saw.