Teeth


EarthForce offers a full line of bucket teeth and carbide bits for your attachment needs. All teeth are compatible on Bobcat buckets and with other Bobcat teeth components. Bolt-on and weld-on tooth assemblies for loader and excavator buckets are available. The tooth is designed so it does not protrude below the cutting edge of the bucket. This allows for a smooth grading job even with a tooth bucket. All newer Bobcat loader buckets are pre-drilled to accommodate the bolt-on tooth assemblies, bolt-on cutting edge and Bucket Bite tooth bar.

Carbide-tipped bits are mounted on a planer's revolving drum to cut and pulverize pavement material, on wheel saws to cut through asphalt, concrete, frozen ground and wire mesh, and on trenchers to dig through tough, rocky soil to make a trench.

All Purpose

Blunt point but heavier carbide bit for longer life. For all types of asphalt and abrasive material. Wide tip for high fracture resistance. PN: 6650137EF

For use on these attachments: Planers and wheelsaws
 

All Purpose

Blunt point but heavier carbide bit for longer life. For all types of asphalt and abrasive material. Wide tip for high fracture resistance. PN: 6650137EF

For use on these attachments: Planers and wheelsaws

Concrete Bit

For cutting concrete and rock. Bit does not have protective flange since concrete debris does not bind the bit as easily as asphalt. The carbide tip is set deeper into the body of this bit to hold it more securely.Offers good wear characteristics due to its blunt point. PN: 6650138EF

For use on these attachments: planers and wheel saws

Concrete Bit

For cutting concrete and rock. Bit does not have protective flange since concrete debris does not bind the bit as easily as asphalt. The carbide tip is set deeper into the body of this bit to hold it more securely.Offers good wear characteristics due to its blunt point. PN: 6650138EF

For use on these attachments: planers and wheel saws

Heavy Duty Concrete

Best bit for hard concrete with large aggregate or steel rebar. For drilling concrete and rock cutting. Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Heavy Duty Concrete

Best bit for hard concrete with large aggregate or steel rebar. For drilling concrete and rock cutting. Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Heavy Duty Concrete

Best bit for hard concrete with large aggregate or steel rebar. For drilling concrete and rock cutting. Double angle tip for maximum impact strength. No protective flange. Bit should be used in those applications where standard bits work their way out of the holders. PN: 6659946EF

For use on these attachments: Planers, wheel saws, and trenchers

Standard

Standard from the factory on 14 to 24-in planers.  For use in all types of
asphalt. Full sleeve retainer for entire block bore protection. Bits have a flange at the
base to protect the bit holder. Sharper point for greater performance. PN: 6672259EF

For lower HP cold planers and wheels saws.

Standard

Standard from the factory on 14 to 24-in planers.  For use in all types of
asphalt. Full sleeve retainer for entire block bore protection. Bits have a flange at the
base to protect the bit holder. Sharper point for greater performance. PN: 6672259EF

For lower HP cold planers and wheels saws.

Surface Planer Bit

Standard planer bit from the factory for surface planers. Smaller in size than normal planer bits. For drilling in medium to hard conditions. Will not survive impact with steel. Flanged carbide tip for increased wear resistance in abrasive cutting.

PN: 6906904EF

High Impact

For high impact and abrasive applications. Deep recessed carbide for longer life. Washer to provide block protection and full sleeve retainer to protect the entire block bore. PN: 7010631EF

For use on the wheel saw.

Small Tooth - Weld-on

Small tooth works on a standard bucket as well as several different types of attachments: backhoe, bucket bite, combination bucket, land plane, and scarifier. Part Number: 1550017EF

Weld-on Shank

Use on backhoe attachment (Ripper). Can be used with Bobcat branded tooth. Part Number: 6630398EF

Standard Cast Tooth - Weld-on

The standard cast tooth is approximately 4 5/8 inches long. Part Number: 6630424EF

Heavy Duty Cast Tooth - Weld-on

An alternative to the standard bucket tooth. This rugged one piece cast tooth is designed for those harsh applications where a heavy-duty tooth is required. Tooth will last longer than the standard tooth, reducing frequent tooth replacement. Part Number: 6657330EF

Complete Bolt-On Assembly

Longer Forged Tooth, Bolt-On Single Shank, Flex Pin, 2 Nuts and Bolts

Part Number: 6737322EF

Bolt-On Single Shank

Part Number: 6737324EF

Long Forged Tooth - Bolt-On

The longer forged tooth is approximately 5 5/8 inches long. When installed, these teeth will add efficiency and enhanced performance. Part Number: 6737325EF

Forged Wider Edge Tooth

The wider edge tooth is designed to protect bucket side edges. The shape of this tooth is the same as the longer forged standard tooth but is 4 inches wide. This forged tooth is designed to add efficiency and extend the life of bucket side and front edge. Part Number: 7102097EF

Standard Cast Tooth - Bolt-on

The standard cast tooth is approximately 4 5/8 inches long. Part Number: 7107319EF

Tiger Tooth

Used with the twin tiger tooth for maximum penetration of hard or frozen surfaces. Installs between twin teeth, provides superior digging capabilities, long-lasting tooth life. Part Number: 7107320EF

Twin Tiger Tooth

Two required per bucket. Installed at each end of bucket edge, twin angled tooth cuts path for bucket side. Designed for penetrating frozen or rocky ground, shale or hard pan. When the outside point is worn, tooth can be reversed to other side of bucket for extended tooth life. Part Number: 7107321EF

Bolt-On Double Shank

Part Number: 7107324EF

Interchangeable Teeth

If you have Bobcat branded teeth, you do not have to purchase the entire tooth assembly if you do not need both components. EarthForce teeth and shanks are interchangeable with Bobcat branded teeth and shanks.

Flex pin

Tooth assembly component. Part Number: 6737326EF